Skip to main content

Changes to Step #2

Edit by Lainie Clem

Edit approved by Lainie Clem

Before
After
Unchanged

Step Lines

[* black] Separate the palm rest assembly from the bottom housing using the plastic opening tool.
[* icon_note] It is recommended that you start from a corner and run the plastic opening tool along the edge of the housing.
[* icon_caution] Lift the palm rest assembly slowly to prevent damaging the two cables connectingthat connect it to the motherboard.
[* icon_caution] Lift the palm rest assembly slowly to prevent damaging the two cables connectingthat connect it to the motherboard.