Skip to main content

Changes to Step #2

Edit by Shaun McGillis

Edit approved by Shaun McGillis

Before
After
Unchanged

Step Lines

[* black] Separate the palm rest assembly from the bottom housing using the plastic spudgeropening tool.
[* icon_note] It is recommended that you start from a corner and run the plastic spudgeropening tool along the edge of the housing.
[* black] Separate the palm rest assembly from the bottom housing using the plastic spudgeropening tool.
[* icon_note] It is recommended that you start from a corner and run the plastic spudgeropening tool along the edge of the housing.