Skip to main content

Changes to Step #2

Edit by Lainie Clem

Edit approved by Lainie Clem

Before
After
Unchanged

Step Lines

[* black] PrySeparate the palm rest assembly off offrom the bottom coverhousing using the plastic spudger.
[* icon_note] It is recommended that you start from a corner and run the toolplastic spudger along the edge of the housing.
[* black] PrySeparate the palm rest assembly off offrom the bottom coverhousing using the plastic spudger.
[* icon_note] It is recommended that you start from a corner and run the toolplastic spudger along the edge of the housing.