Skip to main content

Changes to Step #2

Edit by Kristen Gismondi

Edit approved by Kristen Gismondi

Deleted
Added
Unchanged

Step Lines

[* red] Remove the six 0.75-in7.5mm Torx #20 screws on the bottom face of the nozzle using a T20 Torx screwdrivernozzle.
[* red] Remove the six 0.75-in7.5mm Torx #20 screws on the bottom face of the nozzle using a T20 Torx screwdrivernozzle.
[* icon_note] A screwdriver extension may be necessary to reach the screw closest to the center of the nozzle.