Skip to main content

Changes to Step #2

Edit by Samantha Woo

Edit approved by Samantha Woo

Deleted
Added
Unchanged

Step Lines

[* red] Remove the six 0.75-in Torx #20 screws on the bottom face of the nozzle using a T10T20 Torx screwdriver.
[* icon_note] A screwdriver extension may be necessary to reach the second screw fromclosest to the left sidecenter of the panelnozzle.
[* red] Remove the six 0.75-in Torx #20 screws on the bottom face of the nozzle using a T10T20 Torx screwdriver.
[* icon_note] A screwdriver extension may be necessary to reach the second screw fromclosest to the left sidecenter of the panelnozzle.