Skip to main content

Changes to Step #1

Edit by Sahil Sharma

Edit approved by Sahil Sharma

Before
After
Unchanged

Step Lines

-[* red] Use a Phillips #0 screwdriver to remove the three (3) 15mm screws on the fan unit.
-[* orange] Remove the cable connecting the fan to the motherboard by gently pulling the cable out of its socket.
+[* red] Use a Phillips #0 screwdriver to remove the three (3) 4.8 mm screws from the fan unit.
+[* orange] Remove the cable connecting the fan to the motherboard by pulling the cable out of its socket.