Skip to main content

Changes to this Step

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Heat the back of the phone with a heat gun for 2-3 minutes to soften the adhesiveadhesive securing the battery.
[* icon_note] The battery is held on with a strong adhesive that must be heated prior to pryingIf available, apply some high-concentration (>90%) isopropyl alcohol under each side of the battery out. The longer you heat the back, the easierand allow it will be to remove.
[* icon_note] A hair dryer is a suitable replacement
penetrate for a heat gunseveral minutes to help weaken the adhesive.
[* black] Heat the back of the phone with a heat gun for 2-3 minutes to soften the adhesiveadhesive securing the battery.
[* icon_note] The battery is held on with a strong adhesive that must be heated prior to pryingIf available, apply some high-concentration (>90%) isopropyl alcohol under each side of the battery out. The longer you heat the back, the easierand allow it will be to remove.
[* icon_note] A hair dryer is a suitable replacement
penetrate for a heat gunseveral minutes to help weaken the adhesive.