Skip to main content

Changes to this Step

Edit by Nick Vincnet

Edit approved by Nick Vincnet

Deleted
Added
Unchanged

Step Lines

[* black] Heat the back of the phone with a heat gun for 2-3 minutes to soften the adhesive.
[* icon_note] The battery is held on with a strong adhesive that must be heated prior to prying the battery out. The longer you heat the screenback, the easier it will be to remove.
[* icon_note] The battery is held on with a strong adhesive that must be heated prior to prying the battery out. The longer you heat the screenback, the easier it will be to remove.
[* icon_note] A hair dryer is a suitable replacement for a heat gun.