Skip to main content

Changes to this Step

Edit by David Ton

Edit approved by David Ton

Deleted
Added
Unchanged

Step Lines

[* black] CutLocate the ends of the replacement power cordcord. These should be already stripped; if they are not, strip 2 cm from them using a similar procedure. Using side cutters, cutwire strippers.
[* black] Feed
the blackends of the replacement power cord lines where they feed into the two crimp connectors.
[* black] CutLocate the ends of the replacement power cordcord. These should be already stripped; if they are not, strip 2 cm from them using a similar procedure. Using side cutters, cutwire strippers.
[* black] Feed
the blackends of the replacement power cord lines where they feed into the two crimp connectors.