Skip to main content

Changes to this Step

Edit by Kaden Foster

Edit approved by Kaden Foster

Before
After
Unchanged

Step Lines

[* red] Remove the Torx T5 x 4mm screw using a Torx T5 connecting the black tie bar to the power button/volume control/speaker assembly.
[* icon_note] While it is possible to remove the button/speaker assembly at this point, we found it is easier to remove the black tie bar.
[* orange] Remove the remaining three Torx T5 x 3 mm screws using a Torx T5 holding down the black tie bar.
[* black] Lift the black tie bar offoff of the device.
[* red] Remove the Torx T5 x 4mm screw using a Torx T5 connecting the black tie bar to the power button/volume control/speaker assembly.
[* icon_note] While it is possible to remove the button/speaker assembly at this point, we found it is easier to remove the black tie bar.
[* orange] Remove the remaining three Torx T5 x 3 mm screws using a Torx T5 holding down the black tie bar.
[* black] Lift the black tie bar offoff of the device.