Skip to main content

Changes to this Step

Edit by Paul Manzer

Edit approved by Paul Manzer

Before
After
Unchanged

Step Lines

[* black] Removered] Remove the three, 3 mm screws using a Torx T5 head onx 4mm screw connecting the black tie bar coveringto the camera lenspower button/volume control/speaker assembly.
[* icon_note] While it is possible to remove the button/speaker assembly at this point, we found it easier to remove the black tie bar.
[* orange] Remove the remaining three Torx T5 screws holding down the black tie bar.
[* black] Lift the black tie bar off
.
[* black] Removered] Remove the three, 3 mm screws using a Torx T5 head onx 4mm screw connecting the black tie bar coveringto the camera lenspower button/volume control/speaker assembly.
[* icon_note] While it is possible to remove the button/speaker assembly at this point, we found it easier to remove the black tie bar.
[* orange] Remove the remaining three Torx T5 screws holding down the black tie bar.
[* black] Lift the black tie bar off
.

Image 1

Old Version

New Version

Image 2

Old Version

New Version

Image 3

No previous image

Added