Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Aradia Vargas

Edit approved by Aradia Vargas

Before
After
Unchanged

Step Lines

[* red] Use the #00 (1.5 mm) Phillips bit to undo the (2) screws from the motherboard.
[* black] Use the spudger tool to peel away the mesh tape and reveal the ribbon connectors.
[* orange] Use the opening tool to lift the brown and black tabs to release the ribbon cables and disconnect them.
[* black] The ribbon cables should be free. Pull back on the ribbons to release them from their connectors.
[* black] Slowly lift the vibration motor away from the frame and peel up the tape.