Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Aradia Vargas

Edit approved by Aradia Vargas

Before
After
Unchanged

Step Lines

[* black] Use the #00 Phillips bit to removeundo the (2) screws from the motherboardmotherboard.
[* black] Use the spudger tool to peel away the mesh tape and reveal the ribbon connectorsconnectors.
[* black] Use the opening tool to lift the brown and black tabs to release the ribbon cables and disconnect themthem.
[* black] The ribbon cables should be free. Pull back on the ribbons to release them from their connectorsconnectors.
[* black] Slowly lift the vibration motor away from the frame and peel up the tapetape.
[* black] Use the #00 Phillips bit to removeundo the (2) screws from the motherboardmotherboard.
[* black] Use the spudger tool to peel away the mesh tape and reveal the ribbon connectorsconnectors.
[* black] Use the opening tool to lift the brown and black tabs to release the ribbon cables and disconnect themthem.
[* black] The ribbon cables should be free. Pull back on the ribbons to release them from their connectorsconnectors.
[* black] Slowly lift the vibration motor away from the frame and peel up the tapetape.