Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #4

Edit by Alexander Prasil

Edit approved by Alexander Prasil

Before
After
Unchanged

Step Lines

[* blackred] Use the #00 Phillips bit to undo the (2) screws from the motherboard.
[* blackred] Use the #00 Phillips bit to undo the (2) screws from the motherboard.
[* black] Use the spudger tool to peel away the mesh tape and reveal the ribbon connectors.
[* blackorange] Use the opening tool to lift the brown and black tabs to release the ribbon cables and disconnect them.
[* blackorange] Use the opening tool to lift the brown and black tabs to release the ribbon cables and disconnect them.
[* black] The ribbon cables should be free. Pull back on the ribbons to release them from their connectors.
[* black] Slowly lift the vibration motor away from the frame and peel up the tape.

Image 1

Old Version

New Version

Image 2

Old Version

New Version