Skip to main content

Changes to Step #7

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] And now for the bonus level: controller teardown!
[* black] The screws on this controller are readily visible, no rubber plugs here. Inside we find: a bare board with a single connectorconnector.
[* black] The screws on this controller are readily visible, no rubber plugs here. Inside we find: a bare board with a single connectorconnector.
[* black] The cable is nicely threaded inside to allow some slack, to relieve stress on the connector.
[* black] The front side of the board is almost as bare. A single chip, some passive components, and some contact patches for the buttonsbuttons.
[* black] The front side of the board is almost as bare. A single chip, some passive components, and some contact patches for the buttonsbuttons.
[* icon_note] These buttons act just like many remote controls, when pressed, the button bridges the gap between the conductive paint, completing a circuit—making Mario do something cool!