Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Before
After
Unchanged

Step Lines

[* red] Remove the two 3.3 mm T5 Torx screws securing the display cable assembly.
[* icon_reminder] Take care not to lose the small retaining bracket located under the right screw. If it comes loose, note the orientation shown here for reassembly. The small tab on the outer left edge should be hooked under the perforated metal shield.

Image 2

No previous image

Added

Image 3

No previous image

Added