Skip to main content

Changes to Step #1

Edit by Walter Galan

Edit approved by Walter Galan

Deleted
Added
Unchanged

Step Lines

[* icon_note] Rotate the device 180 degrees to more easily access the rest of the internal components.
[* red] Remove the two 2.5 mm T5 Torx screws securing the power adapter in placeMagSafe DC-In board to the upper case.
[* black] Slide the adapter toMagSafe DC-In board towards the right to free it from its recess within the outer case, then lift it away fromupper case.
[* black] Lift and remove the MagSafe DC-In board out of
the deviceupper case assembly.
[* red] Remove the two 2.5 mm T5 Torx screws securing the power adapter in placeMagSafe DC-In board to the upper case.
[* black] Slide the adapter toMagSafe DC-In board towards the right to free it from its recess within the outer case, then lift it away fromupper case.
[* black] Lift and remove the MagSafe DC-In board out of
the deviceupper case assembly.