Skip to main content

Changes to Step #1

Edit by Walter Galan

Edit approved by Walter Galan

Deleted
Added
Unchanged

Step Lines

[* black] Remove the following eight T5 Torx screws:
[*
screws securing the heat sink to the logic board:
[*
red] Two 2.4 mm T5 screws
[* orange] Six 3.4 mm T5 screws
[* black] Remove the following eight T5 Torx screws:
[*
screws securing the heat sink to the logic board:
[*
red] Two 2.4 mm T5 screws
[* orange] Six 3.4 mm T5 screws
[* black] Grip both ends of the heat sink and lift it up from the logic board.
[* icon_note] When installing the new heat sink, do not forget to replace the thermal paste underneath the heat sink.