Skip to main content

Changes to Step #1

Edit by Jake Devincenzi

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Remove the following eight T5 Torx screws:
[* red] Two (2) 2.4 mm
[* orange] Six (6) 3.4 mm
[* black] Grip both ends of the heat sink and lift it up from the logic board.
[* icon_note] When installing the new heat sink, do not forget to replace the thermal paste underneath the heat sink.

Image 1

No previous image

Added

Image 2

No previous image

Added