Skip to main content

Changes to Step #4

Edit by Jake Devincenzi

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereLift the I/O board straight up, out of the device.
[* black] With the flat of a spudger, release the clip on the right side of the plastic I/O cover.
[* black] After releasing the clip, you can easily lift the cover off of the board
.
[* black] Insert wisdom hereLift the I/O board straight up, out of the device.
[* black] With the flat of a spudger, release the clip on the right side of the plastic I/O cover.
[* black] After releasing the clip, you can easily lift the cover off of the board
.