Skip to main content

Changes to Step #1

Edit by Jake Devincenzi

Pending approval

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereUse the point of a spudger to flip up the locking mechanism on the I/O board connector.
[* black] Flip the spudger around and use the flat end to slide the I/O cable out of the connector.
[* red] Remove the two 3.1 mm T5 Torx screws from the I/O board
.
[* black] Insert wisdom hereUse the point of a spudger to flip up the locking mechanism on the I/O board connector.
[* black] Flip the spudger around and use the flat end to slide the I/O cable out of the connector.
[* red] Remove the two 3.1 mm T5 Torx screws from the I/O board
.

Image 3

Old Version

New Version