Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #2

Edit by Walter Galan

Pending approval

Before
After
Unchanged

Step Lines

[* red] Remove the two Phillips screws securing the display data cable to the logic board.
[*
black] Insert wisdom hereUsing its black pull tab, pull the display data cable connector straight up off its socket on the logic board.
[* red] Remove the two Phillips screws securing the display data cable to the logic board.
[*
black] Insert wisdom hereUsing its black pull tab, pull the display data cable connector straight up off its socket on the logic board.

Image 1

Old Version

New Version