Skip to main content

Changes to Step #2

Edit by Jody Foo

Edit declined by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Use the tip of a spudger to push the camera cable connector out of its socket on the logic board.
[* icon_note] Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket.
[* icon_note] If you are only going to replace or remove the right fan, removing the camera cable is not necessary. In [guide|27690|step 8|stepid=36674], just lift and free the cables from the adhesive that sticks them to the fan.