Skip to main content

Changes to Step #2

Edit by mayer

Edit declined by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Use the tip of a spudger to push the camera cable connector out of its socket on the logic board.
[* icon_note] Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket. This is much easier if you do step 7 first.
[* icon_note] Be sure to push parallel to the board, pushing first on one side, then the other to "walk" the connector out of its socket. This is much easier if you do step 7 first.