Skip to main content

Changes to Step #3

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Use the tip of a spudger to flip up the retaining flap on the right fan ribbon cable ZIF socket.
[* icon_caution] Be sure you are prying up on the hinged retaining flap, '''not''' the socket itself.
[* black] Gently pry upStarting at the top of the cable, slide a plastic opening tool under the right fan ribbon cable to free it from the logic board.
[* icon_caution] Use caution when freeing the cable, as it is strongly adhered to
the logic board.
[* black] Gently pry upStarting at the top of the cable, slide a plastic opening tool under the right fan ribbon cable to free it from the logic board.
[* icon_caution] Use caution when freeing the cable, as it is strongly adhered to
the logic board.