Skip to main content

Changes to Step #2

Edit by Will Budney

Pending approval


Step Lines

[* black] While depressing the connector lock, insert the flat end of a heavy duty spudger into the gap between the power supply connector and its socket.
[* black] Twist the heavy duty spudger to slightly separate the connector from its socket.
[* icon_note] It will be necessary to work from alternate sides until the connector is free.
[* icon_caution] Your power supply may have an ambient light sensor cable attached from the power supply to the logic board. If so, carefully use a spudger to push out the cable towards you using the sides of the cable alternatively to help you slide it out.

Image 3

No previous image