Skip to main content

Changes to Step #1

Edit by Tobias Isakeit

Edit approved by Tobias Isakeit

Deleted
Added
Unchanged

Step Lines

[* black] Use the flat end of a spudger to disconnect the flex cable of the left rear camera.
[* icon_note] As long you're careful while you're removingblack] The second rear camera will come out with the motherboard assembly, yousince it is connected on the other side.
[* black] You
can leave the front facing camera in its placeplace as long as you're careful while removing the motherboard assembly. However if you feel uncertain, carefully remove it with a pair of tweezers.
[* icon_note] As long you're careful while you're removingblack] The second rear camera will come out with the motherboard assembly, yousince it is connected on the other side.
[* black] You
can leave the front facing camera in its placeplace as long as you're careful while removing the motherboard assembly. However if you feel uncertain, carefully remove it with a pair of tweezers.