Skip to main content

Changes to Step #1

Edit by Dominik Schnabelrauch

Edit approved by Dominik Schnabelrauch

Deleted
Added
Unchanged

Step Lines

[* red] Using a plastic opening tool, gently pry upblack] Use the three flat connectors that attach the front-facing camera, secondary rear-facing camera, and screenend of a spudger to disconnect the motherboardflex cable of the left rear camera.
[* black] Lifticon_note] As long you're careful while you're removing the motherboard assembly up fromassembly, you can leave the devicecamera in its place. However if you feel uncertain, carefully remove it with a pair of tweezers.
[* red] Using a plastic opening tool, gently pry upblack] Use the three flat connectors that attach the front-facing camera, secondary rear-facing camera, and screenend of a spudger to disconnect the motherboardflex cable of the left rear camera.
[* black] Lifticon_note] As long you're careful while you're removing the motherboard assembly up fromassembly, you can leave the devicecamera in its place. However if you feel uncertain, carefully remove it with a pair of tweezers.