Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #1

Edit by Walter Galan

Pending approval

Before
After
Unchanged

Step Lines

[* black] Lay the iMac display-side down on a flat surface.
[* red] Loosen the three Phillips screws securing the rear panel to the iMac.
[* icon_caution] These screws are captive in the iMac. The center screw will stop turning after about 3.5 turns and the outer screws will stop turning after about 5.5 turns. Do not try to remove these screws from your iMac.

Image 1

No previous image

Added