Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Step #3

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* black] Use a coffee filter or a lint-free cloth with a drop of ArctiClean Thermal Material Remover to clean the thermal paste residue off the thermal contact surface of your heat sink.
[* black] Once the surface is clean, use a new coffee filter or cloth to apply a drop of ArctiClean Thermal Surface Purifier to remove any oils and prepare the surface.
[* black] Do not touch either the chip or the heatsink, or allow any dust or debris to get on themit. Even a fingerprint can be a major obstacle to thermal transfer on a chiptransfer.
[* black] Do not touch either the chip or the heatsink, or allow any dust or debris to get on themit. Even a fingerprint can be a major obstacle to thermal transfer on a chiptransfer.
[* black] Allow the heat sink to dry completely!