Skip to main content

Changes to Step #9

Edit by Jimmy Tang

Edit approved by Jimmy Tang

Before
After
Unchanged

Step Lines

[title] Solder in new switch and complete!
-[* black] Insert wisdom here.
+[* black] Remount and resolder the upper PCB then connect your mouse to the computer and check that it still functions.
+[* black] Tip: You don't need to reassemble the entire mouse to ensure that the new Omron switch is working. Just connect the USB cable and try clicking with the replaced switch!
+[* black] Once everything is confirmed working, reassemble and reconnect everything you took out and you'll have a working mouse again! :D