Skip to main content

Fix Your Stuff

Right to Repair

Store

Changes to Step #3

Edit by Adam O'Camb

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

[* red] Remove the two 7.2 mm T10 TorxT9 Torx screws securing the power supply to the rear enclosure.
[* icon_note] In newer model iMacs these are 7.2 mm T8 or T9 Torx screws.
[* red] Remove the two 7.2 mm T10 TorxT9 Torx screws securing the power supply to the rear enclosure.
[* icon_note] In newer model iMacs these are 7.2 mm T8 or T9 Torx screws.