Skip to main content

Changes to Step #24

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* black] Lift the logic board EMI shield from the edge nearest the top of the iPad.
[* black] Peel the EMI shield up from the logic board.
[* icon_note] This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.
[* black] Remove the logic board EMI shield.