Skip to main content

Changes to Step #23

Edit by Jeff Suovanen

Edit approved by Jeff Suovanen

Deleted
Added
Unchanged

Step Lines

[* icon_caution] It's important to disconnect the battery before you proceed further. Detaching or connecting the display cables with the battery plugged in can cause a short that will destroy touchscreen functionality.
[* black] To disconnect the battery:
[* black] First, securely prop up the display so that it won't fall or strain the display cables while you work.
[* black] Then, remove the nine Phillips screws securing the logic board EMI shield:
[* red] Eight 1.2 mm screws
[* orange] One 2.4 mm screw

Image 1

No previous image

Added