Skip to main content

Changes to Step #2

Edit by Scott Havard

Edit approved by Scott Havard

Deleted
Added
Unchanged

Step Lines

[* icon_note] Removing the display assembly involves using a halberd spudger or opening pick to separate the adhesive securing the display to the rear case.
[* icon_note] The following steps include unabridged instructions forUse the photos in this procedure.
[* black] Once you've separated all the adhesive, examine
step to know the top edge and bottom cornerslocations of the iPad to check for any adhesive still connecting the display and rear case.
[*
where it is the thickest.
[*
red] Refer to these images while following the guide to see where the adhesive is thickest to get an idea ofand where to cut the deepest with your opening tool.
[* icon_note] The following steps include unabridged instructions forUse the photos in this procedure.
[* black] Once you've separated all the adhesive, examine
step to know the top edge and bottom cornerslocations of the iPad to check for any adhesive still connecting the display and rear case.
[*
where it is the thickest.
[*
red] Refer to these images while following the guide to see where the adhesive is thickest to get an idea ofand where to cut the deepest with your opening tool.