Skip to main content

Changes to Step #2

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* icon_note] Removing the display assembly involves using a halberd spudger or opening pick to separate the adhesive securing the display to the rear case.
[* icon_note] The following steps include unabridged instructions for this procedure.
[* black] Once you've separated all the adhesive, examine the top edge and bottom corners of the iPad to check for any adhesive still connecting the display and rear case.
[* red]
Refer to these images to see where the adhesive is thickest to get an idea of where to cut the deepest with your opening tool.
[* black] Once you've separated all the adhesive, examine the top edge and bottom corners of the iPad to check for any adhesive still connecting the display and rear case.
[* red]
Refer to these images to see where the adhesive is thickest to get an idea of where to cut the deepest with your opening tool.