Skip to main content

Changes to Step #2

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereAt this point, the display assembly should be fully separated from the rear case, but the adhesive along the top and bottom edges is thicker than the left and right edges. Examine the top and bottom and use the halberd spudger or a opening pick to cut away any adhesive connecting the display to the rear case.
[* black] Insert wisdom hereAt this point, the display assembly should be fully separated from the rear case, but the adhesive along the top and bottom edges is thicker than the left and right edges. Examine the top and bottom and use the halberd spudger or a opening pick to cut away any adhesive connecting the display to the rear case.