Skip to main content

Changes to Step #2

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* icon_note] At this point, theRemoving the display assembly should be fully separated from the rear case, butinvolves using a halberd spudger or opening pick to separate the adhesive alongsecuring the top and bottom edges is thicker thandisplay to the left and right edgesrear case.
[* icon_note] The following steps include unabridged instructions for this procedure
.
[* black] ExamineOnce you've separated all the adhesive, examine the top edge and bottom and usecorners of the halberd spudger or a opening pickiPad to cut awaycheck for any adhesive still connecting the display to theand rear case. Refer to these images to see where the adhesive is thickest to get an idea of where to cut the deepest with your opening tool.
[* icon_note] At this point, theRemoving the display assembly should be fully separated from the rear case, butinvolves using a halberd spudger or opening pick to separate the adhesive alongsecuring the top and bottom edges is thicker thandisplay to the left and right edgesrear case.
[* icon_note] The following steps include unabridged instructions for this procedure
.
[* black] ExamineOnce you've separated all the adhesive, examine the top edge and bottom and usecorners of the halberd spudger or a opening pickiPad to cut awaycheck for any adhesive still connecting the display to theand rear case. Refer to these images to see where the adhesive is thickest to get an idea of where to cut the deepest with your opening tool.

Image 1

Old Version

New Version

Image 3

Old Version

New Version