Skip to main content

Changes to Step #2

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* blackicon_note] At this point, the display assembly should be fully separated from the rear case, but the adhesive along the top and bottom edges is thicker than the left and right edges.
[* black]
Examine the top and bottom and use the halberd spudger or a opening pick to cut away any adhesive connecting the display to the rear case.
[* blackicon_note] At this point, the display assembly should be fully separated from the rear case, but the adhesive along the top and bottom edges is thicker than the left and right edges.
[* black]
Examine the top and bottom and use the halberd spudger or a opening pick to cut away any adhesive connecting the display to the rear case.

Image 1

Old Version

New Version

Image 3

Old Version

New Version