Skip to main content

Changes to Step #22

Edit by Scott Havard

Edit approved by Scott Havard

Deleted
Added
Unchanged

Step Lines

[* black] Return to the first step 5 of this guide and ensure the thick portions of adhesive are adequately separated from the display assembly. If they are, continue with this step. Otherwise, slice the adhesive to break it up until the display assembly is freed.
[* black] Return to the first step 5 of this guide and ensure the thick portions of adhesive are adequately separated from the display assembly. If they are, continue with this step. Otherwise, slice the adhesive to break it up until the display assembly is freed.
[* icon_note] The display cables in this iPad are shorter than some users may be comfortable with. Read the following warnings before proceeding:
[* icon_caution] '''Do not pivot the display about the lower edge.''' The display cables do not have enough slack to allow for this and will tear if you do not slide it closer to the display connectorstowards the front-facing camera as you open itlift.
[* icon_caution] '''Do not pivot the display about the lower edge.''' The display cables do not have enough slack to allow for this and will tear if you do not slide it closer to the display connectorstowards the front-facing camera as you open itlift.
[* icon_caution] The display cables will tear if you raise the display more than 80º.
[* black] Lift up on the upper edge of the display and slide it towards youthe front-facing camera to access the iPads internal components.
[* black] Lift up on the upper edge of the display and slide it towards youthe front-facing camera to access the iPads internal components.