Skip to main content

Changes to Step #18

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Use an iOpener to heat the bottom of the iPad.
[* black] Insert a halberdContinue sliding the halberd spudger below the opening pick inalong the lower right corneredge of the iPad.
[* black] Slide the halberd spudger to cut the adhesive. Stop right
iPad stopping short about 1 centimeter before the halberd spudger reachesreaching the home button.
[* black] Insert a halberdContinue sliding the halberd spudger below the opening pick inalong the lower right corneredge of the iPad.
[* black] Slide the halberd spudger to cut the adhesive. Stop right
iPad stopping short about 1 centimeter before the halberd spudger reachesreaching the home button.