Skip to main content

Changes to Step #16

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] HeatInsert the adhesive onhalberd spudger between the display and rear case, along the lower right sideedge of the iPad.
[* black] Insert a halberd spudger below the pick
device.
[* black] HeatInsert the adhesive onhalberd spudger between the display and rear case, along the lower right sideedge of the iPad.
[* black] Insert a halberd spudger below the pick
device.
[* black] Slide the halberd spudger down the side of the iPad to separate the adhesive.