Skip to main content

Changes to Step #12

Edit by Scott Havard

Edit approved by Scott Havard

Deleted
Added
Unchanged

Step Lines

[* black] If necessary, reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften before reinserting the blade of the halberd spudger.
[* black] Insert the blade of the halberd spudger just past the front-facing camera, on the opposite side of the opening pick.
[* black] If necessary, reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften before reinserting the blade of the halberd spudger.
[* black] Insert the blade of the halberd spudger just past the front-facing camera, on the opposite side of the opening pick.
[* black] Continue to slide the blade of the halberd spudger to the upper right corner of the iPad.