Skip to main content

Changes to Step #10

Edit by Scott Havard

Edit approved by Scott Havard

Deleted
Added
Unchanged

Step Lines

[* black] If necessary, reheatReheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften.
[* black] If necessary, reheatReheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften.
[* black] Once the front panel is adequately heated, insert the blade of a halberd spudger next to the opening pick from the previous step.
[* black] Slide the blade betweentowards the display assembly and rear case, stopping inalong the centertop edge of the top edgeiPad, stopping before reaching the front-facing camera.
[* black] Slide the blade betweentowards the display assembly and rear case, stopping inalong the centertop edge of the top edgeiPad, stopping before reaching the front-facing camera.