Skip to main content

Changes to Step #10

Edit by Evan Noronha

Edit approved by Evan Noronha

Deleted
Added
Unchanged

Step Lines

[* black] Insert wisdom hereIf necessary, reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften.
[* black] Once the front panel is adequately heated, insert the blade of a halberd spudger next to the opening pick from the previous step.
[* black] Slide the blade between the display assembly and rear case, stopping in the center of the top edge
.
[* black] Insert wisdom hereIf necessary, reheat your iOpener and lay it over the top edge of the device. Wait a couple minutes for the adhesive to soften.
[* black] Once the front panel is adequately heated, insert the blade of a halberd spudger next to the opening pick from the previous step.
[* black] Slide the blade between the display assembly and rear case, stopping in the center of the top edge
.