Skip to main content

Changes to Step #8

Edit by Scott Havard

Edit approved by Scott Havard

Deleted
Added
Unchanged

Step Lines

[* black] Lay a warm iOpener along the upper left corner of the iPad, spanning from the opening pick to the front-facing camera.
[* black] After letting the adhesive soften, insert the blade of your halberd spudger into the iPad above the opening pick.
[* black] Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.
[* black] Cut the adhesive along the upper left side of the iPad towards the front-facing camera using the halberd spudger. This may require reheating the edge of the iPad.