Skip to main content

Changes to Step #6

Edit by Scott Havard

Edit approved by Scott Havard


Step Lines

[* black] Lay a warm iOpener along the bottom left corner of the iPad, spanning from the opening pick to the home button.
[* black] After letting the adhesive soften, insert a halberd spudger into the iPad next to the opening pick.
[* icon_note] An opening pick can be used in place of the halberd spudger. Use caution if using an opening pick, as inserting the pick too far can damage the display assembly.
[* black] Cut the adhesive along the bottom left side of the iPad using the halberd spudger. This may require reheating the edge of the iPad.
[* black] Continue to slide the halberd spudger back and forth to ensure most of the adhesive is separated.