Skip to main content

Changes to Step #18

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

-[* black] Grasp the logic board with both hands and carefully lift upwards to gain enough clearance to raise the logic board out of the rear case.
-[* icon_note] Do not completely remove the logic board as the power supply connector is still connected to the underside of the board.
+[* black] Grab the logic board and pull it toward yourself slightly to separate the jacks from the rear case.
+[* black] Rotate the top of the logic board toward yourself slightly to gain access to the DC power cable connector.
+[* icon_note] Do not completely remove the logic board as the DC power cable connector is still connected to the underside of the board.