Skip to main content

Changes to Step #6

Edit by mayer

Pending approval

Before
After
Unchanged

Step Lines

-[* red] Remove two T6 Torx screws securing the AirPort/Bluetooth board to the logic board.
+[* red] Remove two 5 mm T6 Torx screws securing the AirPort/Bluetooth board to the logic board.
[* black] Lift the AirPort/Bluetooth board up from its left edge to separate it from its socket on the logic board.
[* icon_caution] Lift the AirPort/Bluetooth board from its left edge only. Trying to lift from its right edge may break the connector off the logic board.