Skip to main content

Changes to Step #6

Edit by Andrew Bookholt

Pending approval

Before
After
Unchanged

Step Lines

[* red] Remove two T6 Torx screws securing the AirPort/Bluetooth board to the logic board.
-[* black] Lift the AirPort/Bluetooth board out from the logic board.
+[* black] Lift the AirPort/Bluetooth board up from its left edge to separate it from its socket on the logic board.
+[* icon_caution] Lift the AirPort/Bluetooth board from its left edge only. Trying to lift from its right edge may break the connector off the logic board.